Search
Close this search box.

How Many Gallons Does a Bathtub Hold? 2024 Guide for Every Type of Bathtub

So, you’re shopping for a new bathtub and you’ve done your measurements-mapped out the space for installation, but something that you haven’t fully understood is the weight when it’s filled. An often overlooked but very important question, as understandably, a bathtub weighs significantly less unfilled than filled. A gallon of water weighs roughly 8 pounds, so if your bathtub can hold around 100 gallons of water, that is roughly around 800 pounds of strain on your floor, not accounting for your body weight as well as the material of your bathtub itself, so yes, it is important to know the capacity of your tub.

Jump to a section:

gallons of water bathtub

In general, there is no ‘standard’ bathtub size as they are quite a large number of varying sizes on the market, but there are typical or more common measurements, which is what will be provided below. On average, a bath uses anywhere between 35-50 gallons(132-189 liters) of water whereas a ten minute shower uses roughly only 25 gallons(94 liters). So, outside of just general heating costs, baths should be regulated to a more special treat, rather than a daily routine as it can be quite expensive on your water and utilities bill.

Standard, Smaller and Larger Bathtubs

To start, the standard bathtub will hold roughly around 80 gallons (302 liters) of water. Much smaller bathtubs can only hold around 40 gallons (150 liters) of water, which typically are more suited for smaller children or function more as a shower space. Whereas much larger bathtubs can easily hold upwards of 100-110 gallons (378-410 liters) of water and these encompass your single person baths that can easily accommodate the additional water weight.

Freestanding, Corner and Other Bathtubs – How Much Can They Hold?

In addition to looking quite different aesthetically, each bathtub will vary their overall water capacity depending on the style and type of bathtub as well. As a rule, freestanding bathtubs are quite large, allowing for more water capacity, corner bathtubs are small, so less water, and drop-ins sit somewhere in between freestanding and corner bathtubs.

how much water in bathtub

Freestanding Bathtubs

Since they are designed for single person bathing, most freestanding bathtubs can hold anywhere from 90-100 gallons of water. (340-378 liters).

Corner bathtub

Corner bathtubs are a bit smaller, designed for more confined spaces, which means water capacity will be significantly smaller, usually able to hold roughly anywhere from 40-60 gallons(150-227 liters) but usually the 40 gallon limit is more common.

Acrylic drop-ins

Acrylic drop-ins fit the more standard bathtub capacity model, usually holding anywhere from 60-80 gallons, though larger sizes do exist as they have quite a large range of models and styles to choose from. on average(227-302 liters).

Shower Tub Combos

Which brings us to shower/tub combos, which have a similar spectrum with freestanding and acrylic drop-ins, as most of these showers are made with either of these styles as the base. On average, you are looking at a minimum of 60 gallons, with a higher end of 110 gallons. (227 liters and 416 liters respectively.)

Jacuzzis and Hot tubs

Jacuzzis come in various sizes, each with a water capacity crucial for potential buyers to consider.

Small hot tubs, designed for efficiency and space-saving, typically hold between 200 and 500 gallons of water, equivalent to about 750 to 1900 liters. These are ideal for those with limited space or prefer a more intimate setting.

Medium hot tubs balance size and capacity, generally holding 300 to 700 gallons (1100 to 2650 liters), making them a popular choice for average-sized homes due to their versatility and moderate space requirement.

Large hot tubs cater to those looking for more space or planning to accommodate larger groups, with capacities ranging from 500 to 1000 gallons, or approximately 1900 to 3800 liters. These are well-suited for spacious areas, often with extra features like enhanced jet systems and diverse seating arrangements. It’s important to note that these figures are estimates, and actual capacities can vary based on specific models and designs.

Another thing to discuss is that with the additional water capacity of your bathtub, you need to also consider the capacity of your water heater. The average home usually houses a water heater with a capacity of around 30-36 gallons of water. If your home supports around 4 or more people, you generally have a larger water heater with a capacity of around 40-60 gallons of water. This is important, as the more water your bath and showers can hold, the more powerful and larger your water heater needs to be in order to support your long relaxing showers/baths to have a consistent flow of heated water.

Share this article:
3.7 7 votes
Article Rating
Subscribe
Notify of
guest
4 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Jimbo
Jimbo
5 years ago

How many gallons of ranch do I need to fill my bathtub. For bathing purposes.

Jimbo
Jimbo
5 years ago

How much Ranch will a bathtub hold. asking for bathing purposes only.

Badeloft USA
Badeloft USA
5 years ago

Our typical 72 gallon tub will hold approximately 9,216 ounces (or 384 24oz bottles) of Ranch dressing.

We usually recommend bubbles and champagne, though 😉

Junmai Ginjo
Junmai Ginjo
4 years ago

Do you think one of your Stone Resin Tubs would be suitable for making my own homemade sake?
Just curious if they are safe for brewing rice wine?? Thanks in advance for your prompt response.

Stone Resin bathtubs starting at $2,940

Free material samples and tub templates

Related Articles

Scroll to Top